SEALFLEX

An internally or externally applied joint sealant in wide range of application in building and civil engineering structures. Use to seal movement joints in building structures, Waterproofing membrane termination for enclosed and exposed applications. Seal flex is based on a specially developed polymer system which gives enhanced technical properties. It cures by loss of carrier to form a flexible seal. It is applied simply from the cartridge/pail and can be finished neatly using suitable tooling. When cured it will be accommodates thermal and moisture movements. It can be over coated with most gloss or emulsion paints.

Sealflex can be applied by hand, trowel or air operated gun. Ensure that the sealant is pushed firmly in to the joint to give complete wetting of the surface. Any tooling of the sealant surface must be carried out immediately using a joint shaping tool soaked in white spirit, or a wet sponge. If required the edges of the joint can be protected with masking tape – if this is done ensure that the tape is removed immediately after tooling.

SEALFLEX has a shelf life of twelve months from date of manufacture when stored in the original unopened container in dry, shaded conditions.

OBS representatives are available to assist you in selecting an appropriate product and to provide on-site application instructions or to conduct jobsite inspections. For further assistance contact ORGANIX tech.support.