Epoxy Tank Lining
A high performance, epoxy lining designed to cure at low temperatures and exhibit excellent resistance properties to a wide variety of chemicals and corrosives. Maintains flexibility and toughness better than standard epoxies of this class. Exhibits excellent adhesion, sag resistance and corrosion resistance. It is a high 100 % solids, flake filled, premium epoxy coating designed for internal steel and concrete substrates with high impact resistance, superior bonding ability to steel and concrete, resistance to broad range of chemicals
Application
MIXING
Use a jiffy type mixer. When operating the mixer avoid plunging it up and down in the bucket.
The can fold air into the resin, which may cause bubbles to form in the coating after it has
been applied. Individually stir each separate Part A and Part B component to a smooth,
uniform consistency and colour.
Spray: Immediately before applying a spray coat, stripe all continuous welds and edges with a brush-coat to assure adequate protection of the areas. All spray equipment should be clean and in proper working order
COVERAGE: 1.0 litre of coating applied wet at 350micron thick (2 coats applied at 175 micron each) will cover 3-4 square meter.
CURING
Surface temperature
24°C Dry to touch – 12 hours, Final cure – 36 hours before immersion
32°C Dry to touch – 4 hours, Final cure – 24 hours before immersion
SAFETY
Handle with care, before and after use. Follow local safety regulations. All skin contact with resin products should be avoided. Barrier creams should be used and operatives should wear protective clothing for further information please request the Material Safety Data Sheet of this product.