Polyurethane Flooring (Floorfort Pu)

Download TDS

Polyurethane Flooring

FLOORFORT PU is a high-performance polyurethane flooring solution designed to meet the evolving needs of both industrial and commercial markets. Offering seamless, hygienic, and safe surfaces, this polyurethane floor system is ideal for a wide range of applications. Specifically formulated for heavy-duty use, FLOORFORT PU accommodates both existing structures and newly built, fast-track projects. This two-component, low-VOC, high-solids, polyester aliphatic urethane coating is perfect for polyurethane floor coating needs in both exterior and interior settings, delivering high gloss, excellent chemical resistance, color retention, and chalk resistance.

The FLOORFORT PU range includes moisture-tolerant, resin-rich polyurethane flooring systems that are well-suited for the most aggressive industrial environments. These solvent-free, non-tainting floors can withstand temperatures up to 120°C at a 9mm thickness. FLOORFORT PU polyurethane flooring is available in various standard systems with colored finishes, including smooth, textured, terrazzo surfaces, and antistatic grades.

Features

  • High resistance to abrasion
  • High resistance to impact
  • Chemical resistance
  • Impermeability to liquid
  • Crack-bridging
  • Slip resistance
  • Electrical conductivity
  • Weather stability and colour fastness
  • Easy cleaning and care
  • Good leveling
  • UV resistant
  • Low VOC

Application

For applying polyurethane flooring with FLOORFORT PU, start by thoroughly mixing both Part A and Part B components. Use a power mixer to blend the components for at least 2 to 5 minutes until you achieve a uniform color. Once mixed, pour the well-blended FLOORFORT PU in an S pattern across a 3 to 6-foot section of the deck. Spread it evenly to the desired thickness using a roller, squeegee, or notched trowel.

FLOORFORT PU polyurethane flooring can be applied with a smooth finish, or with a spatter-coat or aggregate surface. Depending on job site conditions and dry film requirements, all systems will require two or three separate coats. Apply successive coats perpendicular to the previous one to ensure positive coverage and uniform film build. All surfaces must be uniformly coated, and free from voids, pinholes, and blisters. Allow each coat of FLOORFORT PU to dry tack-free, which typically takes a minimum of 4 hours, before applying an additional coat.

Packaging

5L and 20 L, If stored under covered roof, shelf life will be 18 months

Storage

Keep out of reach of children. Ensure good ventilation during the application and drying process. In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice. If the product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice. Refer to the Material Safety Data Sheet (MSDS) for detailed information about the product and transportation and classification criteria.