D-FIX

Download TDS
AD01-D-FIX.pdf

EPDM BONDING ADHESIVE

D-FIX is a high-strength bonding adhesive designed for superior adhesion across various materials. Ideal for use with all types of insulation materials, structural and lightweight concrete, plywood, oriented strand board, and wood fiberboard, D-FIX ensures a reliable and durable bond.

Features

  • Excellent bonding ability and permanent adhesion
  • Recommended for bonding of EPDM with a variety of materials
  • Easy application
  • Resistant to water and moisture
  • No mixing required
  • Solvent-free and non-flammable
  • Extreme adhesion for ultimate bonding
  • Excellent heat temp ( +/_) resistant
  • Highly Durable
  • Odor-free
  • Single-sided, wet lay-in adhesive
  • Low VOC content (less than 50 g / liter)

Application

  • Can be used for a variety of special applications including bonding to wood, concrete blocks, steel, paper, and plastic.
  • Bonding the membrane/protection boards to other various materials and to itself.
  • Contact adhesive in construction and automotive industriesCOVERAGE RATE:
  • The coverage rate for PRIMEX is between 200g/m2, depending upon the evenness and porosity of the substrate and the type of application.

Before application, the surface should be clean, and free of dust, moisture, and grease. D-FIX is applied to the substrate with a brush or roller. EPDM Bonding Adhesive is installed in a one-sided, wet lay-in application on horizontal surfaces. For vertical surfaces, the adhesive is used in the traditional two-sided application, and the two surfaces are mated only after the adhesive becomes tacky (approx. 10 – 15 minutes). This adhesive is a heat- and moisture-cure product, with the cure time depending upon ambient weather conditions. As such, this adhesive is to be used when the temperature is 40°F.

Packing

D-FIX is available in 18 L / 5 L metal pails.

Storage

When stored in an original, unopened container the average life is 10 to 14 months at 10 to 35 °Cif stored in the above-mentioned conditions. Shelf life information is only a recommendation and not a fact of life. The real expiration date highly depends on the history of storage and handling of the accessories. Quality and applicability should thus always be verified: when mixed, the product should stir into a smooth and homogeneous blend with no evidence of major clumping or separation/phasing. Once opened, use within 48 hours.