FLOORFORT PU Heavy performance polyurethane flooring SystemFLOORFORT PU

ORGANIX FLOORING PRODUCTS

MIXING

Substrate preparation:

Cleaning the surface manually or Power wash and insure that the surface is clean and free of dirt, grease, oil and debris. Remove all mold and mildew.

FLOOR FITREL-Epoxy Filler Application

The cracks have to be repaired by FITREL EPOXY FILLER.

Application of FloorFort Prime:

• Prime the fully prepared surface with the well mixed given primer FLOORFORT PRIME
• The primer should be applied in a thin, evenly distributed, continuous film, using a short or medium pile roller depending on the substrate profile.

Application FLOORFORT:

• Apply blended FloorFORT PU Systems using a roller. Require two (2) or three (3) separate coats depending upon job site conditions and dry film requirement

• Allow each separate coat of FLOOR FORT P U to dry tack free prior to Applying an additional coat. This will take a minimum of 4 hours.

1. Substrate 2. Floorfort Prime 3. Floorfort PU –Top finish

Drying time

(1) Floor Fitrel – min 8 hours
(2) Floorfort Prime – 6 to 8 hours

(3) Floorfort PU – 8 hours